Chimney Guide
Chimney Liner Options, Compared
Clay tile, stainless steel and cast-in-place liners — what each is, what it suits, and how we decide which belongs in your chimney.
Call (815) 305-5510The short version: the three liner choices are clay tile, stainless steel and cast-in-place. The right one depends on your chimney’s condition, the appliance it vents and the flue size — and the decision is made after a camera inspection, not over the phone.
The three options
Clay tile
The traditional liner in most older masonry chimneys. Inexpensive and long-lasting when dry and intact, but it cracks under a chimney fire or freeze-thaw and cannot be repaired piece by piece once it fails.
Best for: sound existing masonry chimneys; original construction.
Stainless steel
A continuous, code-listed metal liner dropped down the flue, insulated where needed. The standard choice for relining, for venting a new stove or insert, and for resizing an oversized flue.
Best for: relining, new appliances, resizing.
Cast-in-place
A poured, cement-like liner formed inside the flue, leaving a smooth, insulated, seamless passage that can also reinforce an aging chimney structurally.
Best for: older chimneys needing added strength.
How we choose
Every reline starts with a camera run so we can see the real condition of the flue, confirm the appliance it serves and measure for correct sizing. From there the call is usually straightforward: keep and protect sound clay tile, reline in stainless when the tile has cracked or the flue needs resizing for a new stove or insert, and consider cast-in-place when the masonry itself needs reinforcing. Whatever we fit carries a UL 1777 listing and is sized to the chimney, because an oversized or undersized liner drafts poorly and is unsafe.
When relining is the answer — and when it is not
Relining fixes a cracked or missing liner, an oversized flue after a furnace change, and corrosion in an old metal liner. It is not always necessary: a chimney with sound tile and good mortar may only need sweeping and minor repair. We will tell you honestly which camp yours is in — see our relining service and the relining vs. rebuilding guide for the bigger decisions.
Frequently asked questions
What does a chimney liner do?
It gives combustion gases a smooth, heat-resistant path out of the house and shields the surrounding masonry and framing from heat and acidic byproducts. An unlined or cracked-lined flue is unsafe to use, which is why a liner is the heart of a working chimney.
How do I know my liner needs replacing?
A camera inspection is the only sure way. We look for cracked or spalling clay tiles, gaps at the joints, and corrosion on a metal liner. Signs from inside the house include pieces of tile in the firebox, a persistent draft or smoke problem, or a failed real-estate inspection.
Is clay tile or stainless steel better?
Each has its place. Clay tile is original to most older Plainfield masonry chimneys and lasts decades if it stays dry and uncracked. Stainless steel is the go-to for relining, for venting a new appliance, or for resizing a flue, because it installs as one continuous, code-listed piece.
What is a cast-in-place liner?
It is a poured cement-like liner formed inside the existing flue, creating a smooth, insulated, seamless passage that can also add structural strength to an older chimney. It is the most involved option and suits chimneys where the masonry itself needs reinforcement.
What does UL 1777 mean?
It is the safety standard a chimney liner is tested and listed to. We fit liners that carry that listing and size them to the appliance and chimney height, because a liner that is too wide or too narrow draws poorly and is unsafe. Sizing is not guesswork.
Can I reline the chimney myself?
We do not recommend it. Correct sizing, a proper top and bottom connection, insulation where required and a code-compliant install all matter for safety, and a mistake vents heat or carbon monoxide into the structure. Relining is a job for a professional with the right listed components.
How long does relining take?
A straightforward stainless reline is often a one-day job; a cast-in-place liner or one involving masonry repair takes longer. We quote it after an inspection, because flue height, access and the condition of the existing chimney all change the scope.
Which liner do you recommend for my chimney?
Whichever the inspection supports. We camera the flue, confirm the appliance and sizing, and lay out the options honestly — repair the existing clay tile where it is sound, or reline in stainless or cast-in-place where it is not. See our relining and relining vs. rebuilding pages.
By James Rodriguez, founder of Central Chimney Service, Plainfield IL — 29 years in the trade.
Not sure what your flue needs?
Call (815) 305-5510Published November 4, 2026
